Estes Executioner 29 mm Vander-Burn Plywood Upgrade Kit
Upgrade your Estes Executioner to the max with our high quality, durable laser-cut plywood components! Let your rocket take on bigger impulse engines, as the plywood components can handle much more strenuous forces than the stock balsa and cardboard components can.
Vander-Burn model rocketry components are made for experienced modelers who are comfortable modifying their own rockets beyond supplied instructions. As with any modifications from the original manufacturers’ design, you may need to add nose weight to re-balance the rocket, and any potential modifications should be completed in a simulation software or properly tested before building and launching.
Included Components and notes:
Three (3) 1/8" thick Baltic Birch Plywood through-the-wall fins to fit Estes Executioner kit #1951.
Three (3) 1/8" thick Baltic Birch Plywood 29 mm to BT-80 centering rings (one ring has shock cord mounting holes)
One (1) Motor Mount Tube 29 mm x minimum 6.5”
One (1) Motor Screw-on Retainer 29 mm (Estes 9750)
If you would like to purchase the Estes Executioner Rocket kit, click here.
Upgrade your Estes Executioner to the max with our high quality, durable laser-cut plywood components! Let your rocket take on bigger impulse engines, as the plywood components can handle much more strenuous forces than the stock balsa and cardboard components can.
Vander-Burn model rocketry components are made for experienced modelers who are comfortable modifying their own rockets beyond supplied instructions. As with any modifications from the original manufacturers’ design, you may need to add nose weight to re-balance the rocket, and any potential modifications should be completed in a simulation software or properly tested before building and launching.
Included Components and notes:
Three (3) 1/8" thick Baltic Birch Plywood through-the-wall fins to fit Estes Executioner kit #1951.
Three (3) 1/8" thick Baltic Birch Plywood 29 mm to BT-80 centering rings (one ring has shock cord mounting holes)
One (1) Motor Mount Tube 29 mm x minimum 6.5”
One (1) Motor Screw-on Retainer 29 mm (Estes 9750)
If you would like to purchase the Estes Executioner Rocket kit, click here.
Upgrade your Estes Executioner to the max with our high quality, durable laser-cut plywood components! Let your rocket take on bigger impulse engines, as the plywood components can handle much more strenuous forces than the stock balsa and cardboard components can.
Vander-Burn model rocketry components are made for experienced modelers who are comfortable modifying their own rockets beyond supplied instructions. As with any modifications from the original manufacturers’ design, you may need to add nose weight to re-balance the rocket, and any potential modifications should be completed in a simulation software or properly tested before building and launching.
Included Components and notes:
Three (3) 1/8" thick Baltic Birch Plywood through-the-wall fins to fit Estes Executioner kit #1951.
Three (3) 1/8" thick Baltic Birch Plywood 29 mm to BT-80 centering rings (one ring has shock cord mounting holes)
One (1) Motor Mount Tube 29 mm x minimum 6.5”
One (1) Motor Screw-on Retainer 29 mm (Estes 9750)
If you would like to purchase the Estes Executioner Rocket kit, click here.
